Lubricant for PVC, pigment dispersant, releasing agent for engineering plastics and toner
日本語
English
Hi-WAX™
Low molecular weight polyolefin
Applications detail
Applications
Characteristics
- Basic information
- Details of Characteristics
- Details of Applications
Overview
Hi-WAX™ is a brand of polyethylene wax made by direct polymerization of ethylene, propylene and butene, developed by Mitsui Chemicals based on its unique Ziegler catalyst polymerization technology.
It is used in a broad range of applications, including pigment dispersants, slip agent and mold release agents for molding resins, modifiers for ink and paints, aids for textile treatment and film capacitor materials.
What is Hi-WAX™
- Solid/semisolid and brittle organic substance at room temperature.
- Low melting point (less than 150℃) and low melt viscosity.
- Crystalline and low molecular weight (300-10,000) resin.
Inquiries related to Safety Data Sheets （SDS）
Filler dispersant
Uses
Dry blend resin, filler and High wax, and then melt compound with an extruder.
Availability
Fillers covered with the modified low molecular weight polyolefin can disperse uniformly in the matrix base resin.
It leads to the excellent balance of mechanical and surface properties.
Recommended grades
1105A, 220MP, 4202E
Pigment dispersant
Uses
Add Hi-WAX™ and pigment to the three-roll-mill to make up the color base.
Availability
It is possible to manufacture high content color master batches because Hi-WAX™ is compatible with pigment and expresses excellent kneading behavior into the higher shear of the extruder.
Recommended grades
PE/PP: 420P, 720P
PVC: 320MP, 4202E
Slip agent for PVC
Uses
Add PVC powder, stabilizer, calcium, calcium stearate and Hi-WAX™ to the twin screw extruder.
Availability
It is possible to express excellent slip properties and prevent the degradation of PVC because Hi-WAX™ affects the area between the surface of the molder and melting PVC.
Extrusion: Saving power consumption and increasing productivity.
Injection: Improving the appearance of the molding.
Recommended grades
Rigid PVC(Pipes, Fittings), Soft PVC(Wire & Cable, Sheets): 220MP, 4202E
Textile treatment agent
Uses
Disperse Hi-WAX™ in hot water to make up wax emulsion. Immerse textiles in the emulsion to attach wax to the surface of the textile, then dry heat.
Availability
It is possible to improve high-speed sewing, tear strength and texture.
Recommended grades
Shrink-proof: 4202E, 4052E
Sewing improvement: 4052E
Texture improvement: 1105A, 2203A
Release agent for injection molding
Uses
Add pellets of ABS, PS, etc. and Hi-WAX™ to the injection molder.
Availability
It is possible to express excellent releasability and improve the molding cycle and extrusion properties such as die maintenance.
Recommended grades
PC, PBT, PA: 405MP, 720P, 800P
ABS: 200P, 400P, 220MP
Contact Us
Semiconductor & Optical Materials Division